硅石石英石振动筛/滚筒筛煤矸石机器/铸造电动筛机
滚筒筛主要适用于矿山、煤炭、电力、垃圾、商砼余料、建筑、化工等领域对干、湿物料的分级、脱泥，同时还可以用于对粗颗粒物料的脱水作业。随着对滚筒筛的升级换代，现广泛用于海滨矿用沙金矿的前期分用作业工作，同时还可以配合滚筒洗矿机或槽式洗矿机对含泥量高、且粘性比较大的泥质沙金进行有效的筛分用松散等作业。
硅石石英石振动筛/滚筒筛煤矸石机器/铸造电动筛机操作方法：
1、选择合适的场地将设备放平放好，应首先确认地基有足够的强度（必要时用混凝土硬化），以保证设备能够正常安全工作；
2、检查各部位螺栓有无松动、各运行部位是否异常；
3、接通电源检查电机及各个传动部位工作是否正常；
4、空载试车，检查电机、传动部件温升情况及是否有异响；
5、试车正常后方可加料工作，观察出料是否正常，带正常后关闭密封隔离罩，应先开皮带机，再开滚筒筛，进料口加料要均匀不可过量；检查出料粒径和有无漏料及扬尘情况。
硅石石英石振动筛/滚筒筛煤矸石机器/铸造电动筛机、严禁带负荷强行启动，每班工作完毕停机前应将输送机的 物料卸载完毕。
产品英文详情介绍
silica quartz stone shaker / drum sieve machine coal / casting drum motor sieve sieve mainly used in mining, coal, electricity, waste, excess material supplier concrete, building, chemical industry dry, wet materials classification, desliming, dehydration can also be used for the coarse particulate material of the job. with the upgrading trommel, is now widely used in mining waterfront operations demultiplexing early work with gold sand, but also with the trough drum washing machine or a washing machine containing a high clay content, viscosity, and relatively large muddy alluvial effective screening with loose other operations. silica quartz stone shaker / drum sieve machine coal / casting operating electric sieve method: 1. select the appropriate site good flat discharge device, first verify the foundation has sufficient strength (necessary concrete curing), to ensure safety device can properly; 2, check all parts loose bolts, each operation is abnormal parts; 3, check whether the power is turned on and the motor drives the respective work portions; 4, load test, check the motor, the temperature rise of the transmission member and whether there is abnormal sound; 5, before feeding the normal work after test, the material is normal to observe, to close the cover after the sealing band normally isolated, belt should be open, then open trommel feed inlet for feeding a uniform not excessive; aggregate size, and check out a seamless materials and dust conditions. silica quartz stone shaker / drum sieve machine coal / casting electric sifter non-load force start, stop class should be finished before the work machine conveying the material uninstalled.
查看其它相同标签的文章：滚筒石英
河南丰泉机械有限公司
13523224619
qq: 769672269
